Ecore walks the walk by seeking programs and organizations that share its mission to protect the planet. Ecore is an active member of many organizations, and many of its products have earned third-party certifications for its compliance with rigorous environmental standards.
Environmental Product Declaration
- An Environmental Product Declaration, EPD®, is a verified document that reports environmental data of products based on life cycle assessment (LCA) and other relevant information and in accordance with the international standard ISO 14025 (Type III Environmental Declarations). An EPD is defined by its Product Category Rules (PCR). PCR are documents that define the rules and requirements for EPDs of a certain product category. They are vital for the concept of environmental declarations according to ISO 14025 as they enable transparency and comparability between different EPDs based on the same PCR.
- Several of our products have gone through the rigorous EPD process, including a comprehensive life cycle assessment according to ISO 14040 standards. Our EPDs were prepared by SCS Global Services based on the NSF International Product Category Rule (PCR) for Flooring: Carpet, Resilient, Laminate, Ceramic, Wood. Following completion, our EPDs were externally verified by FFK LTD as conforming to the requirements of ISO 14025:2006 and ISO 21930:2007. This also meets LEED v4 requirements.
Ecore's EPDs can be downloaded below or on SCS Global Services' Green Product Guide.
- Vinyl over Rubber Environmental Product Declaration
- Rubber Environmental Product Declaration
Health Product Declaration
Health Product Declarations (HPDs) disclose the potential hazards associated with a building product ingredient. HPDs were created by the Health Product Declaration Collaborative, whom established the Open Standard which consists of a defined format and rules for reporting. Several of our products have version two Health Product Declarations which meet LEED v4 requirements.
LEED stands for Leadership in Energy and Environmental Design and is an internationally recognized green building program. LEED is a voluntary, consensus-based, market-driven program that provides third-party verification of green buildings. LEED provides building owners and operators the tools they need to immediately impact their building’s performance and bottom line, while providing healthy indoor spaces for a building’s occupants.
Many interior products have the potential to contribute points to LEED; but, since credits are based on the performance of all the products involved in a particular project, there is not one stand-alone product that can guarantee you will obtain LEED credits. It is the combination, and the weight of each, that is critical.
Ecore products are designed to meet stringent criteria required to help earn points under 2 of the 6 categories of LEED: Material and Resources and Indoor Environmental Quality.
- Performance Collection LEEDv4 Guide
- Turf LEEDv4 Guide
- Basic Fit LEEDv4 Guide
- Bounce 2 LEEDv4 Guide
- PlayGuard LEEDv4 Guide
- HydroGrip Motivate LEEDv4 Guide
- Aurora Motivate LEEDv4 Guide
- Ebb & Flow Motivate LEEDv4 Guide
Most Ecore products are FloorScore certified to qualify for use in high performance schools. The FloorScore program was developed by the Resilient Floor Covering Institute (RFCI) in conjunction with the Scientific Certification Systems (SCS), which tests and certifies flooring as well as flooring adhesives products, and certifies production facilities for compliance with rigorous indoor air quality emission requirements such a CA Section 03150. Volatile organic compounds (VOCs) are evaluated using health-based specifications. Flooring and adhesives that earn FloorScore certification qualify for use in high performance schools and office buildings. Products bearing the FloorScore label meet the indoor air emissions criteria of the Collaborative for High Performance Schools (CHPS) and LEED Green Building Rating Systems.
Redeux Reclamation Program
As an advocate for sustainable design and eco-friendly living, Ecore has developed "Redeux" to further our commitment to reducing waste, reusing scrap, and recycling old products and samples in order to manufacture new products. Ecore customers can send back old or remnant recycled rubber and cork products to Ecore’s Lancaster, PA manufacturing facility. Ecore takes this reclaimed material and makes it into new flooring, underlayments, and industrial products. Material is accepted on a case-by-case basis. To learn more about the process and how to return material, read this flyer.
What products can be recycled?
- Recycled rubber and cork products from the following collections may be recycled: Composed, Wellness, Rx, ECOsilence, Basic Fit, Performance, PaveSafe, QT, PlayGuard, and Ecore Industrial branded products.
- In most cases, products containing an ECOguard coating or a scrim, products installed using Ecore's E-Grip III adhesive, and products made with Ecore's itsTRU™ technology will be accepted.